This charger is designed for portable, flexible and multi types of battery. It can detect the battery type and charge the battery automatically under your selected charging current. Built-in LED indicators to display the charging status and 5V/1000mAh USB output function













1.   Warming:


l   This charge is only for charging cylindrical li-ion (3.7V, 3.8V), Ni-MH/Ni-Cd, LiFePO4(Li-ion) batteries.

l   Please read this instruction before use; Pay attention to the recommended charging current, never select improper charging current

l   When charge with 5V USB AC adapter, 2A-current AC adapter is recommended

l   The charger ma get hot during working a long time, handle with care!

l   Please cut off the electricity and remove the battery from the charger when charging complete.

l   Indoor condition only!!

l   The displaying data of the charger is only for reference; please refer to professional test instruments if you need accurate data




2.  Feature and Specification:


l   Micro USB DC 5V input, two independent slots and charging channels with built-in micro-computer management system to ensure the high efficiency

l   Charging current options (0.5A/0.7A/1.0A/2A)

l   Four LED indicators shows the charging status (25%, 50%, 75%, 100%) and also shows the battery type when insert into battery (1.2V Ni-MH , 3.2V Li-Fe, 3.7V Li-ion, 3.85V li-ion)

l   Identify Li-ion and Ni-MH automatically; But, you need to adjust the charge mode for LiFePO4 and 3.85V li-ion battery

l   It can active 0V rechargeable battery but the charger don’t charge 1.65V ~ 1.85V battery types.

l   Buit with Over-charging protection, over-discharging protection and polar reverse protection. Also, it can identify broken battery.

l   Charing mode: instant current and voltage.

l   DC input charging: working power source at 5V-2A (Micro plug)

l   Standard automatical 5V/1000mAh USB output port




3.  Select Button, LED and function.


 MODE Button:

l   Press the button to select the battery type when insert into a battery. It begin to charge the battery after fixing the battery type (please noted that it identify Li-ion and Ni-MH automatically, don’t need to select manually)

l   Press the button and hold it for 2 seconds whenever after connection to power, it can switch the charging current between 0.5A/0.7A/1.0A/2A ; 


LED Indicator

l   Connect the charger to power, all  LED indicators will be on, when no battery insert after 5 seconds, LED indicators will be off except the 0.5A current indictor

l   When battery is inserted into the charger, 4 LED indictors will be on and 3.7V LED indictors flicker, then, please click the MODE button to fix the correct battery type.  It will begin to charge the battery 5 seconds later, and the LED indictors will show the charging status.

l   Press the MODE button to show the battery type( 5 seconds ) during charging and return to show the charging status

l   It can shows the battery’s remaining power when put battery into the charger ( no connection with charging power)

l   USB output indictor: When USB output is detected, the battery volume indictors will be on for 10 seconds and then off, click the button to show the battery’s volume rate.








4.  Specification:


l   Input: Micro USB DC 5V/2A

l   Output: 1.4V , 4.2V±0.05V , 3.65±0.05V , 4.35±0.05V

l   Output current: 500/1000mAh

l   Constant voltage charging, cutoff current: < 100mAh

l   Standby current:<15mAh


5.  USB Output Function


l   USB output no-load voltage: 4.90V-5.30V

l   Output current: 1000mAh (1A)

l   No-Load current: < 1mAh

l   The output voltage is 4.75V-5.25V when current is 1000mAh

l   Output protection voltage: 3.0±0.1V


6.  Compatibility


l   Li-ion/IMR: 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440



7.  Size


l   112mm × 90mm × 30mm




Shenzhen XinShengLi power co., LTD | 粤ICP备11107091号-2