LiitoKala

Lii-200

Smart, Fast

___________________________________________________________________________________________________________________________________________

Multiple charging current selection

Let charging more flexible!

Lii-200 Built-in multiple charge current circuit configuration, so that the charge is more flexible, depending on the type and capacity of the battery to determine the size select the charge current, the battery safer, saves time.

By holding down the button "current" 3 seconds to change the charge current (500mA / 1000mA / 1500mA)

___________________________________________________________________________________________________________________________________________

Let charging more secure

Products built-in MCU control circuit, real-time monitoring of the battery charge, and has over-charge protection, over-discharge protection, anti-reverse polarity protection and short circuit protection, so that the battery always maintained in a safe state!

___________________________________________________________________________________________________________________________________________

Independent dual-slot design

Lii-200 charger uses two independent output slot design, working independently of each other between the two slots, when put to the battery charge, the microcontroller will automatically determine the battery is a nickel-metal hydride batteries or lithium-ion battery, so you can at the same time rechargeable lithium-ion battery, it can charge a nickel-metal hydride battery and a lithium-ion battery.

___________________________________________________________________________________________________________________________________________

Let the bad battery live again

According to a bad battery case may be, not all bad battery can activate!

___________________________________________________________________________________________________________________________________________

Charge the phone

Lii-200 has a USB 5V output, the output current of 1000mA, can charge most mobile digital products.

When the product is not energized, put the battery hold down the "Current" button for 3 seconds to switch USB 5V output.

___________________________________________________________________________________________________________________________________________

Parameters

Input: DC12V / 1.5A
Constant current output: 4.2V ...... 500mA / 1000mA / 1500mA * 2
Pulse output: 1.42V ...... 500mA / 1000mA / 1500mA * 2
Charging cut-off voltage: lithium-ion battery 4.2 ± 0.05V,
                                            NiMH battery 1.42V

Constant voltage charging cut-off current: <100m A
External Power Standby current: <15.0m A;

USB port output load voltage: 4.90-5.30V;
Output Current: 1000 m A;
-load current: <1m A;
When the load current 800m A, its port output voltage: 4.80-5.25V;

stop the output protection voltage: 3.0 ± 0.1V;